Trigger Industries Standard Height Mud Flaps
Couldn't load pickup availability
Description
Standard Height mud flaps built for daily driving and towing, with stainless construction and heavy rubber matting.
- Kickbacks allow for over-sized tires
- Full Stainless Steel Construction
- Available in White Powdercoat, Black Powdercoat, Black Rock Guard , Full Polished Stainless or custom colours. Please add paint code to notes at check out for custom colours.
- PLEASE NOTE - our house white is a matte finish, it is close to: Ford Oxford White, GM Summit / Olympic White, Ram Bright White. It will contrast with metallic and pearl whites.
- Sold in sets of four
- Please allow up to 4 weeks for custom orders. this is subject to change. Do contact us for our current timeline for custom orders.
- Note not all paint codes have an available powder match.
- Trigger Trim is recommended for all of our mudflaps. Trim is not compatible with large aftermarket fender flares.
- 1.25" Kickback on 12" and 13" Widths
- 1.5" Kickback on 14" Width
- 2.25" Kickback on 16" Width
- Stock wheel/tire setup
- Slightly larger wheel/tire up to 33”
- No more than 1” of tire poke
13” Typical Fitment:
- Levelling kit
- Small lift (4” approx)
- 33”-36” tire
- 1”- 3” tire poke
14” Typical Fitment:
- 4”-8” Lift kit
- 33”-37” tire
- 2”-4.5” tire poke
16” Typical Fitment:
- Must have a 14.5” tire or larger, trust us!
- Minimum 12” wide wheel, typically 14” however
- 35” - 40” tire
2021 Bronco Flaps
Flaps are only available in 12" wide. Sasquatch with wider flare or Non Sasquatch , some side step protrude into the wheel well and may require trimming or flipping for more clearance. If you have any questions send us an email or give us a call.
GMC HD 2024+ AT4X
This kit does not include the filler caps found on the HD and the HD high clearance kits as they are not required to replace the factory splash guards. The mount plate may require one additional hole to be drilled subject to wheel and tire offset. Do contact us for more information.
GMC HD 2020+ High Clearance Kit
This kit increased clearance behind the front tire with an additional 45 degree angle in the mount plate and the filler cap. Clearance is increased by approx 1.5”. Do call or email us to get more information on this kit or if you think this is what you need. Please note some trimming of the body is required. Made to order, build time may vary. Not refundable as they are considered custom geometry.
Specific items like Long-Johns or Dually orders, please note that it may take up to a week to fulfill and ship your order due to size and coating combinations, processing and assembly times.
Powder Coating Disclaimer
Please be aware that there may be slight differences in shade between powder-coated products and the paint on your vehicle. Powder coating and traditional paint have different application processes and finishing characteristics, which can result in subtle color variations. We do offer many color-matched powder coats that our customers are extremely happy with. Exact matches may not be achievable to all factory paint options, and not all factory paints have a powder coat to match. If you have any questions about powder coating, wondering if a color can be matched, or would like to see some swatches, feel free to reach out to us!