Boost Tube Kit Natural Finish Tubes 13-18 Ram 6.7 Banks Power
Increase hot side flow area up to 103 percent over the stock 2-3/4 inch boost tubes with Banks' huge 3-1/2 inch OEM left and right side boost tubes. Stock hot side tube is dented at the factory, bringing it's diameter down to a tiny 2-1/4 inch. Banks boost tubes are 3-1/2 inch constant diameter mandrel bent with larger radius bends. More air allows for more fuel which means more horsepower.
Banks hot and cold side tubes have up to 103 percent greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots.
Looking for the ultimate flow increase? Banks Boost-Tubes are larger than the factory pipe and designed to work with not only the stock elbow but also the new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up even faster.
Banks hot side Boost-Tube has 103 percent greater flow area than OEM hot side when counting the OEM dent in the tube. Better flowing intercooler tubes results in less boost pressure loss allowing for more air and fuel to be delivered to your engine resulting in maximum horsepower. Replace your stock 2-3/4 inch boost tubes with Banks' huge 3-1/2 inch OEM left and right side boost tubes. This kit is designed to work with the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).
Banks cold side has 67 percent greater flow area than OEM cold side.
(103 percent larger if you count the OEM dent)
