Kryptonite Tie Rods for 2011-2026 Chevy Silverado/GMC Sierra 2500HD/3500HD with Oversized Tapered Outers
- Chevrolet Silverado 2500 / 2500HD2011+
- Chevrolet Silverado 3500 / 3500HD2011+
- GMC Sierra 2500 / 2500HD2011+
- GMC Sierra 3500 / 3500HD2011+
Before you order
Not sure it fits? Ask us.
Send your year, model and engine. We'll confirm the part number before you buy.
Pay later
Afterpay & Zip
Split it into instalments
Delivery
Australia-wide
Usually 3β7 business days
Genuine
US & Canadian brands
Not copies or knock-offs
Support
Real people, no bots
20+ years fitting this gear
Aussie owned. 25 years in the auto trade.
About us
Normally ships within 3β8 business days
Right-hand-drive converted truck? Steering linkage, track bars and stabilisers are designed for factory left-hand-drive trucks. Some RHD conversions change the steering layout, so contact us with your conversion details before ordering and we'll confirm fitment.
Fits:
2011-2026Β Chevy 2500/3500Β
2011-2026Β GMC 2500/3500Β
Important Fitment Details:
*These Tie rods are built Specifically for the 2011-2026 GM HD Trucks Equipped with a Fabtech RTS Style Lift kit that utilizes an alternate size outer rod end.
*Will Not Fit an OEM Knuckle.Β
Attention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required. Replacement end links availableΒ here.
Features:
- Heat treated chromoly nickel outer studs.
- Bulletproof, all steel inner ball sockets.Β
- Solid 1 1/4"Β Hexagon steel body.
- Left and Right hand jam nuts for the ultimate adjust ability
Description:
Engineered exclusively for the extreme demands of today's heavy duty truck to work with stock or modified suspension. Kryptonite tie rods will fit any 2011-2019 2500/3500 GM HD Truck that has the centerlink mounted in the factory location and has Fabtech aftermarket knuckles. Using superior components and engineering, these tie rodsΒ easilyΒ outperform the competition. ThisΒ pair is for use with your factory center link.
These Tie Rods can easily be upgraded later to pair with our SS Series Centerlink.
CLICK HERE TO SEE CENTERLINK UPGRADE KIT
Β In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite Death GripΒ tie rods. The OEM tie rods fail at 9000 pounds of pressure.Β The much larger diameter aftermarket tie rods designedΒ to fitΒ lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite Death GripΒ tie rods held up to an incredibleΒ 21000 pounds of pressure before pulling apart.
All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)
Instructions:
CLICK HERE FOR COMPLETE INSTALLATION INSTRUCTIONS
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage.Β Race it, jump it, offβroad it, wreck it, lift itβwe donβt care. If you can break it, weβll replace it.
Your KryptoniteΒ products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase. Complete warranty details can be found [here].