Kryptonite Stage 2 Leveling Kit for 2020-2026 Chevy Silverado/GMC Sierra 2500HD/3500HD
- Chevrolet Silverado 2500 / 2500HD2020+
- Chevrolet Silverado 3500 / 3500HD2020+
- GMC Sierra 2500 / 2500HD2020+
- GMC Sierra 3500 / 3500HD2020+
Before you order
Not sure it fits? Ask us.
Send your year, model and engine. We'll confirm the part number before you buy.
Pay later
Afterpay & Zip
Split it into instalments
Delivery
Australia-wide
Usually 3β7 business days
Genuine
US & Canadian brands
Not copies or knock-offs
Support
Real people, no bots
20+ years fitting this gear
Aussie owned. 25 years in the auto trade.
About us
Normally ships within 3β8 business days
Right-hand-drive converted truck? Steering linkage, track bars and stabilisers are designed for factory left-hand-drive trucks. Some RHD conversions change the steering layout, so contact us with your conversion details before ordering and we'll confirm fitment.
Fits:Β
2020β2026 Chevy 2500HD / 3500HDΒ
2020β2026 Chevy 2500HD / 3500HDΒ
Important Fitment Details:
Will NOT fit: AT4X & ZR2 modelsΒ with DSSV shocksΒ
- Designed to provide up to 2β of front lift
- Allows clearance for 35β tire with no trimming
- You can fit up to a 37" tire with some trimming
- Will not fit DSSV-equipped AT4X/ZR2 models
Any adjustment beyond 2β of lift over stock height is not recommended & may cause front shock failure
Features:
- Complete bolt-on system includes everything needed for install
- Forged torsion keys β 25% stronger than OEM
- Maintains factory ride quality and steering geometry
- Includes upper control arms with upgraded bolt-in ball joints
- Shock extension brackets allow use of OEM shocks
-
Greaseable By Design β Apply 4β6 pumps during installation, then maintain with approximately 2-4 pumps every 5,000β7,000 miles. Designed to purge contaminants without overfilling the boot
Description:
Level your truck the right wayβwith strength, geometry, and ride quality in mind. The Kryptonite Stage 2 Leveling Kit is built to get your front end aligned, raised, and reinforcedβall while maintaining factory ride feel and component integrity.
Kryptoniteβs forged torsion keys are stronger than stock and allow for a precise 1β2β front lift. This kit also includes our boxed upper control arms, designed to correct suspension geometry and eliminate the limitations of stock arms. With pre-installed ball joints, bushings, and sleeves, install is straightforward and worry-free.
The included shock extension brackets retain your stock shocks, saving you money while maximizing travel. This is an ideal upgrade for work trucks, daily drivers, or anyone looking to safely run larger tires (up to 34") without committing to a full lift system.
Includes:
- 1 x Kryptonite Upper Control Arm Pair - Part# KRUCA20
- 4 x Control Arm Sleeves
- 8 x Polyurethane Control Arm Bushings
- 2 x Upper Bump Stops
- 2 x Kryptonite Bolt-in Upper Ball Joints
- 2 x Forged Torsion Keys - Part# KRKEY20
- 1 x Shock Extension Kit - Part#Β KRSE11
- 1 x Complete Hardware Package
Instructions:
DOWNLOAD CONTROL ARM INSTALLATION INSTRUCTIONS HERE
DOWNLOAD LEVELING KEY INSTALLATION INSTRUCTIONS HERE
DOWNLOAD SHOCK EXTENSION INSTALLATION INSTRUCTIONS HERE
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage.Β Race it, jump it, offβroad it, wreck it, lift itβwe donβt care. If you can break it, weβll replace it.
Your KryptoniteΒ products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase. Complete warranty details can be found [here].