Tough Toys Track Bar Reinforcement & Steering Box Sector Shaft Brace Suitable For Jeep JL & JT Wrangler & Gladiator 2019+ Right Hand Drive

Using your 2019 and newer JL Wrangler or JT Gladiator for its intended purpose offroad can lead to increased stress on your steering components. The addition of larger tires can ultimately result in loose and worn steering components. Reinforce and repair the chassis-side track bar bracket with our Tough Toys - Track Bar Bracket Reinforcement & Sector Shaft Brace for the JL Wrangler and JT Gladiator. With this 6mm thick steel bolt-on solution, you can confidently hit the trails, knowing your steering components are secure and stronger than OEM, eliminating concerns about potential "death wobble."

Crafted from 6mm thick precision laser cut steel, the Tough Toys - Track Bar Bracket Reinforcement & Sector Shaft Brace is designed to bolt onto the OEM track bar bracket on the chassis of your JL Jeep Wrangler or JT Jeep Gladiator, 2019 and newer models.

This product serves two crucial purposes:

1. Prevention or Repair of Oval Holes:
   
   • Addresses the common issue of oval (wallowed out) holes on the OEM chassis-side track bar bracket.
   • Provides a tight-fit hole and a partially threaded bolt with a fully shanked section riding on both mounting holes.
   • Prevents "death wobble" by reinforcing the chassis track bar bracket to withstand extreme off-roading stress.
2. Double Shear Configuration for Steering Box Stability:
   
   • Utilizes a longer nut with a shoulder for the sector shaft, creating a double shear configuration.
   • Combined with a bearing installed in a block mounted under the steering box, enhances steering box longevity and stability, particularly with larger tires.

Key Features:

• Automotive engineer approved
• No weld, no cut, no drill installation - completely bolt-on
• 6mm wall laser-cut and fully welded bracket
• 12mm thick sector shaft brace with replaceable sealed roller bearing
• Upgraded track bar flange bolt and nut
• Powder coated for corrosion resistance
• 100% Australian made

Suits the Following Vehicles: 

• 2019 and newer Jeep Wrangler JL / JT Gladiator

This product has been approved as a suitable upgrade for Jeep Wrangler vehicles by a nationally approved automotive engineer. The approval is based on engineering drawings, applied load calculations, and a practical inspection of a panhard brace fitted to a vehicle. Refer to the JL Wrangler and JT Gladiator Track Bar Reinforcement and Sector Shaft Brace Engineer's Report for details.

Refer to the JL Wrangler and JT Gladiator Track Bar Reinforcement and Sector Shaft Brace Installation Instructions for detailed information regarding the installation of this product.

• Only compatible with OEM steering boxes.  Tested and confirmed compatible with the OEM cast iron housing steering box (highly recommended).
• If using the early model JL Wrangler Aluminium Steering Box, reuse the two OEM longer bolts in the appropriate locations when installing this track bar brace kit.  
• Do not install this product if there is pre-existing play in the steering box sector shaft. Rebuild or replace the steering box first!